2013年1月6日星期日

How to Program Motorola 2 Way Radios

1Press the Menu button until the code starts to flash on the display panel. Press the plus or minus buttons to select an eliminator code. Press the PTT button to set the code. Eliminator codes minimize interference.
2Program a channel to be skipped when scanning. You can skip noisy channels as well as channels you just don’t want to listen to. Press and hold the plus or minus button for at least three seconds. The channel will be removed from the scan list. You will need to do this again if you turn the 2 way radio off.
3Program the channel you skipped back in. Simply turn the radio off and then back on.
4Program the sensitivity levels. This is useful if you have voice activation enabled. Press Menu until an icon depicting a face talking appears. Press the up or down button to change the sensitivity. Level 3 is for quiet environments; 2 is for most environments and 1 is for noisy environments.
5Program a call tone. Press the Menu button three times. Press the minus or plus buttons to choose a tone.

没有评论:

发表评论