2013年1月4日星期五

How to Wire a Two-Way Radio in a Yukon

1 Open the Yukon’s hood and use a socket wrench to remove the battery’s negative terminal.
2 Remove the four screws from the central dash surrounding the radio using a Phillips screwdriver.
3 Pry the central dash off the radio using a flat-head screwdriver. Pull the radio out and disconnect its wiring connector. Remove it from the vehicle.
4 Place the 2 way radio into the dashboard and connect the wiring connector to the radio.
5 Reattach the central dash and its screws. Reconnect the battery and close the hood.

没有评论:

发表评论