2013年1月8日星期二

How to Setup a Motorola Radio

The Motorola 2 way radio allows two parties to interact with each other over a large area, such as a construction site or during a road trip with two separate cars. Upon receiving your radio, you may have a few questions about how to program certain functions. Using the basic controls on the radio, you can program the date and time, program channels, and communicate effectively and efficiently.
Power
1Lower the battery pack’s top edge under the groove at the top of the battery chamber (located on the back of your radio).
2Press the remainder of the battery pack down into the battery chamber until you hear a subtle snap.
3Place the radio into the battery charger bottom first. Face the front of the radio toward the front of the charger. You see the battery icon on the display of the radio.
4Charge the radio until the battery icon displayed on the screen is full.
Time and Date
5Push the right navigation button, until “CLCK (clock)” is displayed on the screen (located on the face of the radio). Push the soft key (an unassigned key featuring one dot, two dots, or three dots) below the word “CLCK” on the display to bring up the current date and time. Push the soft key below the word “Edit,” and the first setting flashes, meaning you can alter it.
6Push the up or down navigation buttons to move the first item (by default, it’s the hour mode) to select either a “24 Hour” or “12 Hour” format.
7Push the right navigation button to move to the time field. It flashes. Press the up and down navigation buttons to set the current time.
8Push the right navigation button to select the date field. Press the up and down navigation buttons to set the correct date.
9Push the soft key beneath the word “Save” when you are ready to save your settings and exit.

没有评论:

发表评论