2013年1月3日星期四

How to Program an HT1250

The Motorola HT1250 2 way radio is capable of handling up to 128 separate channels for communication. The radio is generally pre-programmed from the dealer with a set of local channels, but you may not want to use the original options. If you want to set your own options, it only takes a few minutes to program the Motorola HT1250 by removing unwanted channels or adding on other available channels.
1 Turn the volume knob at the top of the HT1250 clockwise until the radio powers on. Press the “Menu Mode” button on the front of the radio.
2 Press the down arrow key until you reach the “Menu Lists” option in the menu. Press the “Menu Mode” button again to choose the option.
3 Use the down arrow key to scroll to the “Scan List” option and press the “Menu Mode” button. Scroll to “Add Entry” to program a new channel in the HT1250. Press “Menu Mode.”
4 Scroll through the list of available channels and press “Menu Mode” to add the selected channel. Press the “Back” button and scroll to “Delete Entry” if you want to remove a channel from the radio.
5 Press “Menu Mode” to confirm the option. Scroll to the channel you want to delete and press “Menu Mode” twice to delete it from the HT1250′s list of available channels.

没有评论:

发表评论